[. . . ] [. . . ] Red LED will turn off after the headset is fully charged. Pair the headset with your mobile phone 1 Ensure that the headset is charged and turned off. Settings Connectivity Settings Settings Connectivity 2 Ensure that the mobile phone is Bluetooth Devices Found turned on and its Bluetooth feature is activated. For details, refer to the user manual of the mobile phone. Add Bluetooth device Philips SHB1400 Enter Password 3 Press until the LED starts flashing Select Back Select Back Select Back 4 Pair the headset with the mobile ''0000'' not required for some mobile phones. Please refer to www. philips. com/welcome for full user manual. Using your headset Turn headset on/off Check battery Pick up/ end a call Adjust volume Redial the last number Reject a call Activate voice dialing Transfer call to mobile phone Mute the Mic Press until LED turns on/off. > 50%: 1 blue flash < 50%: 2 red flashes < 25%: 3 red flashes Press . twice quickly. *Available if supported by your mobile phone. LED and sound indication The red/blue LED flashes alternately. [. . . ] [. . . ]